It’s the final countdown…. to Winter, that is. With just over a month to go before the official start of Winter, now is the time to get your final mow of the season done before the ground freezes and your lawn mower begins its hibernation. Can’t believe we’re here already!
Here is everything you need to know about your last mow of the season.
Mow It Short
The final mow before winter should be adjusted so that the lawn is cut shorter than usual. Adjusting the height between 1.5 – 2 inches is a good bet. This can help prevent disease over the winter, as longer grass gets easily matted down, making it ideal for diseases to damage the lawn.
Be careful with the height adjustment, though – you don’t want to scalp your grass – so adjusting the height in stages during the last few cuts before the final mow is a good idea.
Don’t forget to raise the mower back up to 2.5 inches for that glorious first mow in the Spring!
Bag The Clippings
When the mowing is finished, remember to bag and compost the clippings if the cuttings start to pile up on your lawn. The less organic material you have on your lawn before winter, the better. 
While it’s a common practice to mulch using organic material in the summer, bagging it in the Fall is more ideal because it eliminates clumps that could lead to diseases if left unattended.
Avoid Frost
Avoid mowing your lawn if the ground is dormant, covered in frost, or is already wet. These issues will make the grass clumpy and fragile, and you’ll end up doing more harm than good to your lawn in the long run.
A frost covered lawn should always be stayed off of until the frost has lifted.
Other Maintenance
After finishing up with the mowing, use this to time to tackle other maintenance tasks that you didn’t have time for in the Spring and Summer months. Your mower has gone through a busy stretch, and needs a little TLC to get back into working shape for next season.
You should inspect your mower for damaged parts, install a new spark plug, change the oil, empty the gas tank and remove the dull mower blades for sharpening. For those of you that aren’t do-it-yourselfers, take your mowers to a small engine repair shop or your local hardware store for the necessary repairs.
Contributed by: